7 files changed, 1724 insertions, 0 deletions

diff --git a/vendor/golang.org/x/image/tiff/buffer.go b/vendor/golang.org/x/image/tiff/buffer.go
new file mode 100644
index 00000000..d1801be4
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/buffer.go
@@ -0,0 +1,69 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package tiff
+
+import "io"
+
+// buffer buffers an io.Reader to satisfy io.ReaderAt.
+type buffer struct {
+	r   io.Reader
+	buf []byte
+}
+
+// fill reads data from b.r until the buffer contains at least end bytes.
+func (b *buffer) fill(end int) error {
+	m := len(b.buf)
+	if end > m {
+		if end > cap(b.buf) {
+			newcap := 1024
+			for newcap < end {
+				newcap *= 2
+			}
+			newbuf := make([]byte, end, newcap)
+			copy(newbuf, b.buf)
+			b.buf = newbuf
+		} else {
+			b.buf = b.buf[:end]
+		}
+		if n, err := io.ReadFull(b.r, b.buf[m:end]); err != nil {
+			end = m + n
+			b.buf = b.buf[:end]
+			return err
+		}
+	}
+	return nil
+}
+
+func (b *buffer) ReadAt(p []byte, off int64) (int, error) {
+	o := int(off)
+	end := o + len(p)
+	if int64(end) != off+int64(len(p)) {
+		return 0, io.ErrUnexpectedEOF
+	}
+
+	err := b.fill(end)
+	return copy(p, b.buf[o:end]), err
+}
+
+// Slice returns a slice of the underlying buffer. The slice contains
+// n bytes starting at offset off.
+func (b *buffer) Slice(off, n int) ([]byte, error) {
+	end := off + n
+	if err := b.fill(end); err != nil {
+		return nil, err
+	}
+	return b.buf[off:end], nil
+}
+
+// newReaderAt converts an io.Reader into an io.ReaderAt.
+func newReaderAt(r io.Reader) io.ReaderAt {
+	if ra, ok := r.(io.ReaderAt); ok {
+		return ra
+	}
+	return &buffer{
+		r:   r,
+		buf: make([]byte, 0, 1024),
+	}
+}
diff --git a/vendor/golang.org/x/image/tiff/compress.go b/vendor/golang.org/x/image/tiff/compress.go
new file mode 100644
index 00000000..3f176f00
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/compress.go
@@ -0,0 +1,58 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package tiff
+
+import (
+	"bufio"
+	"io"
+)
+
+type byteReader interface {
+	io.Reader
+	io.ByteReader
+}
+
+// unpackBits decodes the PackBits-compressed data in src and returns the
+// uncompressed data.
+//
+// The PackBits compression format is described in section 9 (p. 42)
+// of the TIFF spec.
+func unpackBits(r io.Reader) ([]byte, error) {
+	buf := make([]byte, 128)
+	dst := make([]byte, 0, 1024)
+	br, ok := r.(byteReader)
+	if !ok {
+		br = bufio.NewReader(r)
+	}
+
+	for {
+		b, err := br.ReadByte()
+		if err != nil {
+			if err == io.EOF {
+				return dst, nil
+			}
+			return nil, err
+		}
+		code := int(int8(b))
+		switch {
+		case code >= 0:
+			n, err := io.ReadFull(br, buf[:code+1])
+			if err != nil {
+				return nil, err
+			}
+			dst = append(dst, buf[:n]...)
+		case code == -128:
+			// No-op.
+		default:
+			if b, err = br.ReadByte(); err != nil {
+				return nil, err
+			}
+			for j := 0; j < 1-code; j++ {
+				buf[j] = b
+			}
+			dst = append(dst, buf[:1-code]...)
+		}
+	}
+}
diff --git a/vendor/golang.org/x/image/tiff/consts.go b/vendor/golang.org/x/image/tiff/consts.go
new file mode 100644
index 00000000..3e5f7f14
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/consts.go
@@ -0,0 +1,149 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package tiff
+
+// A tiff image file contains one or more images. The metadata
+// of each image is contained in an Image File Directory (IFD),
+// which contains entries of 12 bytes each and is described
+// on page 14-16 of the specification. An IFD entry consists of
+//
+//  - a tag, which describes the signification of the entry,
+//  - the data type and length of the entry,
+//  - the data itself or a pointer to it if it is more than 4 bytes.
+//
+// The presence of a length means that each IFD is effectively an array.
+
+const (
+	leHeader = "II\x2A\x00" // Header for little-endian files.
+	beHeader = "MM\x00\x2A" // Header for big-endian files.
+
+	ifdLen = 12 // Length of an IFD entry in bytes.
+)
+
+// Data types (p. 14-16 of the spec).
+const (
+	dtByte     = 1
+	dtASCII    = 2
+	dtShort    = 3
+	dtLong     = 4
+	dtRational = 5
+)
+
+// The length of one instance of each data type in bytes.
+var lengths = [...]uint32{0, 1, 1, 2, 4, 8}
+
+// Tags (see p. 28-41 of the spec).
+const (
+	tImageWidth                = 256
+	tImageLength               = 257
+	tBitsPerSample             = 258
+	tCompression               = 259
+	tPhotometricInterpretation = 262
+
+	tFillOrder = 266
+
+	tStripOffsets    = 273
+	tSamplesPerPixel = 277
+	tRowsPerStrip    = 278
+	tStripByteCounts = 279
+
+	tT4Options = 292 // CCITT Group 3 options, a set of 32 flag bits.
+	tT6Options = 293 // CCITT Group 4 options, a set of 32 flag bits.
+
+	tTileWidth      = 322
+	tTileLength     = 323
+	tTileOffsets    = 324
+	tTileByteCounts = 325
+
+	tXResolution    = 282
+	tYResolution    = 283
+	tResolutionUnit = 296
+
+	tPredictor    = 317
+	tColorMap     = 320
+	tExtraSamples = 338
+	tSampleFormat = 339
+)
+
+// Compression types (defined in various places in the spec and supplements).
+const (
+	cNone       = 1
+	cCCITT      = 2
+	cG3         = 3 // Group 3 Fax.
+	cG4         = 4 // Group 4 Fax.
+	cLZW        = 5
+	cJPEGOld    = 6 // Superseded by cJPEG.
+	cJPEG       = 7
+	cDeflate    = 8 // zlib compression.
+	cPackBits   = 32773
+	cDeflateOld = 32946 // Superseded by cDeflate.
+)
+
+// Photometric interpretation values (see p. 37 of the spec).
+const (
+	pWhiteIsZero = 0
+	pBlackIsZero = 1
+	pRGB         = 2
+	pPaletted    = 3
+	pTransMask   = 4 // transparency mask
+	pCMYK        = 5
+	pYCbCr       = 6
+	pCIELab      = 8
+)
+
+// Values for the tPredictor tag (page 64-65 of the spec).
+const (
+	prNone       = 1
+	prHorizontal = 2
+)
+
+// Values for the tResolutionUnit tag (page 18).
+const (
+	resNone    = 1
+	resPerInch = 2 // Dots per inch.
+	resPerCM   = 3 // Dots per centimeter.
+)
+
+// imageMode represents the mode of the image.
+type imageMode int
+
+const (
+	mBilevel imageMode = iota
+	mPaletted
+	mGray
+	mGrayInvert
+	mRGB
+	mRGBA
+	mNRGBA
+	mCMYK
+)
+
+// CompressionType describes the type of compression used in Options.
+type CompressionType int
+
+// Constants for supported compression types.
+const (
+	Uncompressed CompressionType = iota
+	Deflate
+	LZW
+	CCITTGroup3
+	CCITTGroup4
+)
+
+// specValue returns the compression type constant from the TIFF spec that
+// is equivalent to c.
+func (c CompressionType) specValue() uint32 {
+	switch c {
+	case LZW:
+		return cLZW
+	case Deflate:
+		return cDeflate
+	case CCITTGroup3:
+		return cG3
+	case CCITTGroup4:
+		return cG4
+	}
+	return cNone
+}
diff --git a/vendor/golang.org/x/image/tiff/fuzz.go b/vendor/golang.org/x/image/tiff/fuzz.go
new file mode 100644
index 00000000..ec52c788
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/fuzz.go
@@ -0,0 +1,29 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build gofuzz
+
+package tiff
+
+import "bytes"
+
+func Fuzz(data []byte) int {
+	cfg, err := DecodeConfig(bytes.NewReader(data))
+	if err != nil {
+		return 0
+	}
+	if cfg.Width*cfg.Height > 1e6 {
+		return 0
+	}
+	img, err := Decode(bytes.NewReader(data))
+	if err != nil {
+		return 0
+	}
+	var w bytes.Buffer
+	err = Encode(&w, img, nil)
+	if err != nil {
+		panic(err)
+	}
+	return 1
+}
diff --git a/vendor/golang.org/x/image/tiff/lzw/reader.go b/vendor/golang.org/x/image/tiff/lzw/reader.go
new file mode 100644
index 00000000..78204ba9
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/lzw/reader.go
@@ -0,0 +1,272 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package lzw implements the Lempel-Ziv-Welch compressed data format,
+// described in T. A. Welch, ``A Technique for High-Performance Data
+// Compression'', Computer, 17(6) (June 1984), pp 8-19.
+//
+// In particular, it implements LZW as used by the TIFF file format, including
+// an "off by one" algorithmic difference when compared to standard LZW.
+package lzw // import "golang.org/x/image/tiff/lzw"
+
+/*
+This file was branched from src/pkg/compress/lzw/reader.go in the
+standard library. Differences from the original are marked with "NOTE".
+
+The tif_lzw.c file in the libtiff C library has this comment:
+
+----
+The 5.0 spec describes a different algorithm than Aldus
+implements.  Specifically, Aldus does code length transitions
+one code earlier than should be done (for real LZW).
+Earlier versions of this library implemented the correct
+LZW algorithm, but emitted codes in a bit order opposite
+to the TIFF spec.  Thus, to maintain compatibility w/ Aldus
+we interpret MSB-LSB ordered codes to be images written w/
+old versions of this library, but otherwise adhere to the
+Aldus "off by one" algorithm.
+----
+
+The Go code doesn't read (invalid) TIFF files written by old versions of
+libtiff, but the LZW algorithm in this package still differs from the one in
+Go's standard package library to accomodate this "off by one" in valid TIFFs.
+*/
+
+import (
+	"bufio"
+	"errors"
+	"fmt"
+	"io"
+)
+
+// Order specifies the bit ordering in an LZW data stream.
+type Order int
+
+const (
+	// LSB means Least Significant Bits first, as used in the GIF file format.
+	LSB Order = iota
+	// MSB means Most Significant Bits first, as used in the TIFF and PDF
+	// file formats.
+	MSB
+)
+
+const (
+	maxWidth           = 12
+	decoderInvalidCode = 0xffff
+	flushBuffer        = 1 << maxWidth
+)
+
+// decoder is the state from which the readXxx method converts a byte
+// stream into a code stream.
+type decoder struct {
+	r        io.ByteReader
+	bits     uint32
+	nBits    uint
+	width    uint
+	read     func(*decoder) (uint16, error) // readLSB or readMSB
+	litWidth int                            // width in bits of literal codes
+	err      error
+
+	// The first 1<<litWidth codes are literal codes.
+	// The next two codes mean clear and EOF.
+	// Other valid codes are in the range [lo, hi] where lo := clear + 2,
+	// with the upper bound incrementing on each code seen.
+	// overflow is the code at which hi overflows the code width. NOTE: TIFF's LZW is "off by one".
+	// last is the most recently seen code, or decoderInvalidCode.
+	clear, eof, hi, overflow, last uint16
+
+	// Each code c in [lo, hi] expands to two or more bytes. For c != hi:
+	//   suffix[c] is the last of these bytes.
+	//   prefix[c] is the code for all but the last byte.
+	//   This code can either be a literal code or another code in [lo, c).
+	// The c == hi case is a special case.
+	suffix [1 << maxWidth]uint8
+	prefix [1 << maxWidth]uint16
+
+	// output is the temporary output buffer.
+	// Literal codes are accumulated from the start of the buffer.
+	// Non-literal codes decode to a sequence of suffixes that are first
+	// written right-to-left from the end of the buffer before being copied
+	// to the start of the buffer.
+	// It is flushed when it contains >= 1<<maxWidth bytes,
+	// so that there is always room to decode an entire code.
+	output [2 * 1 << maxWidth]byte
+	o      int    // write index into output
+	toRead []byte // bytes to return from Read
+}
+
+// readLSB returns the next code for "Least Significant Bits first" data.
+func (d *decoder) readLSB() (uint16, error) {
+	for d.nBits < d.width {
+		x, err := d.r.ReadByte()
+		if err != nil {
+			return 0, err
+		}
+		d.bits |= uint32(x) << d.nBits
+		d.nBits += 8
+	}
+	code := uint16(d.bits & (1<<d.width - 1))
+	d.bits >>= d.width
+	d.nBits -= d.width
+	return code, nil
+}
+
+// readMSB returns the next code for "Most Significant Bits first" data.
+func (d *decoder) readMSB() (uint16, error) {
+	for d.nBits < d.width {
+		x, err := d.r.ReadByte()
+		if err != nil {
+			return 0, err
+		}
+		d.bits |= uint32(x) << (24 - d.nBits)
+		d.nBits += 8
+	}
+	code := uint16(d.bits >> (32 - d.width))
+	d.bits <<= d.width
+	d.nBits -= d.width
+	return code, nil
+}
+
+func (d *decoder) Read(b []byte) (int, error) {
+	for {
+		if len(d.toRead) > 0 {
+			n := copy(b, d.toRead)
+			d.toRead = d.toRead[n:]
+			return n, nil
+		}
+		if d.err != nil {
+			return 0, d.err
+		}
+		d.decode()
+	}
+}
+
+// decode decompresses bytes from r and leaves them in d.toRead.
+// read specifies how to decode bytes into codes.
+// litWidth is the width in bits of literal codes.
+func (d *decoder) decode() {
+	// Loop over the code stream, converting codes into decompressed bytes.
+loop:
+	for {
+		code, err := d.read(d)
+		if err != nil {
+			if err == io.EOF {
+				err = io.ErrUnexpectedEOF
+			}
+			d.err = err
+			break
+		}
+		switch {
+		case code < d.clear:
+			// We have a literal code.
+			d.output[d.o] = uint8(code)
+			d.o++
+			if d.last != decoderInvalidCode {
+				// Save what the hi code expands to.
+				d.suffix[d.hi] = uint8(code)
+				d.prefix[d.hi] = d.last
+			}
+		case code == d.clear:
+			d.width = 1 + uint(d.litWidth)
+			d.hi = d.eof
+			d.overflow = 1 << d.width
+			d.last = decoderInvalidCode
+			continue
+		case code == d.eof:
+			d.err = io.EOF
+			break loop
+		case code <= d.hi:
+			c, i := code, len(d.output)-1
+			if code == d.hi && d.last != decoderInvalidCode {
+				// code == hi is a special case which expands to the last expansion
+				// followed by the head of the last expansion. To find the head, we walk
+				// the prefix chain until we find a literal code.
+				c = d.last
+				for c >= d.clear {
+					c = d.prefix[c]
+				}
+				d.output[i] = uint8(c)
+				i--
+				c = d.last
+			}
+			// Copy the suffix chain into output and then write that to w.
+			for c >= d.clear {
+				d.output[i] = d.suffix[c]
+				i--
+				c = d.prefix[c]
+			}
+			d.output[i] = uint8(c)
+			d.o += copy(d.output[d.o:], d.output[i:])
+			if d.last != decoderInvalidCode {
+				// Save what the hi code expands to.
+				d.suffix[d.hi] = uint8(c)
+				d.prefix[d.hi] = d.last
+			}
+		default:
+			d.err = errors.New("lzw: invalid code")
+			break loop
+		}
+		d.last, d.hi = code, d.hi+1
+		if d.hi+1 >= d.overflow { // NOTE: the "+1" is where TIFF's LZW differs from the standard algorithm.
+			if d.width == maxWidth {
+				d.last = decoderInvalidCode
+			} else {
+				d.width++
+				d.overflow <<= 1
+			}
+		}
+		if d.o >= flushBuffer {
+			break
+		}
+	}
+	// Flush pending output.
+	d.toRead = d.output[:d.o]
+	d.o = 0
+}
+
+var errClosed = errors.New("lzw: reader/writer is closed")
+
+func (d *decoder) Close() error {
+	d.err = errClosed // in case any Reads come along
+	return nil
+}
+
+// NewReader creates a new io.ReadCloser.
+// Reads from the returned io.ReadCloser read and decompress data from r.
+// If r does not also implement io.ByteReader,
+// the decompressor may read more data than necessary from r.
+// It is the caller's responsibility to call Close on the ReadCloser when
+// finished reading.
+// The number of bits to use for literal codes, litWidth, must be in the
+// range [2,8] and is typically 8. It must equal the litWidth
+// used during compression.
+func NewReader(r io.Reader, order Order, litWidth int) io.ReadCloser {
+	d := new(decoder)
+	switch order {
+	case LSB:
+		d.read = (*decoder).readLSB
+	case MSB:
+		d.read = (*decoder).readMSB
+	default:
+		d.err = errors.New("lzw: unknown order")
+		return d
+	}
+	if litWidth < 2 || 8 < litWidth {
+		d.err = fmt.Errorf("lzw: litWidth %d out of range", litWidth)
+		return d
+	}
+	if br, ok := r.(io.ByteReader); ok {
+		d.r = br
+	} else {
+		d.r = bufio.NewReader(r)
+	}
+	d.litWidth = litWidth
+	d.width = 1 + uint(litWidth)
+	d.clear = uint16(1) << uint(litWidth)
+	d.eof, d.hi = d.clear+1, d.clear+1
+	d.overflow = uint16(1) << d.width
+	d.last = decoderInvalidCode
+
+	return d
+}
diff --git a/vendor/golang.org/x/image/tiff/reader.go b/vendor/golang.org/x/image/tiff/reader.go
new file mode 100644
index 00000000..de73f4b9
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/reader.go
@@ -0,0 +1,709 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package tiff implements a TIFF image decoder and encoder.
+//
+// The TIFF specification is at http://partners.adobe.com/public/developer/en/tiff/TIFF6.pdf
+package tiff // import "golang.org/x/image/tiff"
+
+import (
+	"compress/zlib"
+	"encoding/binary"
+	"fmt"
+	"image"
+	"image/color"
+	"io"
+	"io/ioutil"
+	"math"
+
+	"golang.org/x/image/ccitt"
+	"golang.org/x/image/tiff/lzw"
+)
+
+// A FormatError reports that the input is not a valid TIFF image.
+type FormatError string
+
+func (e FormatError) Error() string {
+	return "tiff: invalid format: " + string(e)
+}
+
+// An UnsupportedError reports that the input uses a valid but
+// unimplemented feature.
+type UnsupportedError string
+
+func (e UnsupportedError) Error() string {
+	return "tiff: unsupported feature: " + string(e)
+}
+
+var errNoPixels = FormatError("not enough pixel data")
+
+type decoder struct {
+	r         io.ReaderAt
+	byteOrder binary.ByteOrder
+	config    image.Config
+	mode      imageMode
+	bpp       uint
+	features  map[int][]uint
+	palette   []color.Color
+
+	buf   []byte
+	off   int    // Current offset in buf.
+	v     uint32 // Buffer value for reading with arbitrary bit depths.
+	nbits uint   // Remaining number of bits in v.
+}
+
+// firstVal returns the first uint of the features entry with the given tag,
+// or 0 if the tag does not exist.
+func (d *decoder) firstVal(tag int) uint {
+	f := d.features[tag]
+	if len(f) == 0 {
+		return 0
+	}
+	return f[0]
+}
+
+// ifdUint decodes the IFD entry in p, which must be of the Byte, Short
+// or Long type, and returns the decoded uint values.
+func (d *decoder) ifdUint(p []byte) (u []uint, err error) {
+	var raw []byte
+	if len(p) < ifdLen {
+		return nil, FormatError("bad IFD entry")
+	}
+
+	datatype := d.byteOrder.Uint16(p[2:4])
+	if dt := int(datatype); dt <= 0 || dt >= len(lengths) {
+		return nil, UnsupportedError("IFD entry datatype")
+	}
+
+	count := d.byteOrder.Uint32(p[4:8])
+	if count > math.MaxInt32/lengths[datatype] {
+		return nil, FormatError("IFD data too large")
+	}
+	if datalen := lengths[datatype] * count; datalen > 4 {
+		// The IFD contains a pointer to the real value.
+		raw = make([]byte, datalen)
+		_, err = d.r.ReadAt(raw, int64(d.byteOrder.Uint32(p[8:12])))
+	} else {
+		raw = p[8 : 8+datalen]
+	}
+	if err != nil {
+		return nil, err
+	}
+
+	u = make([]uint, count)
+	switch datatype {
+	case dtByte:
+		for i := uint32(0); i < count; i++ {
+			u[i] = uint(raw[i])
+		}
+	case dtShort:
+		for i := uint32(0); i < count; i++ {
+			u[i] = uint(d.byteOrder.Uint16(raw[2*i : 2*(i+1)]))
+		}
+	case dtLong:
+		for i := uint32(0); i < count; i++ {
+			u[i] = uint(d.byteOrder.Uint32(raw[4*i : 4*(i+1)]))
+		}
+	default:
+		return nil, UnsupportedError("data type")
+	}
+	return u, nil
+}
+
+// parseIFD decides whether the IFD entry in p is "interesting" and
+// stows away the data in the decoder. It returns the tag number of the
+// entry and an error, if any.
+func (d *decoder) parseIFD(p []byte) (int, error) {
+	tag := d.byteOrder.Uint16(p[0:2])
+	switch tag {
+	case tBitsPerSample,
+		tExtraSamples,
+		tPhotometricInterpretation,
+		tCompression,
+		tPredictor,
+		tStripOffsets,
+		tStripByteCounts,
+		tRowsPerStrip,
+		tTileWidth,
+		tTileLength,
+		tTileOffsets,
+		tTileByteCounts,
+		tImageLength,
+		tImageWidth,
+		tFillOrder,
+		tT4Options,
+		tT6Options:
+		val, err := d.ifdUint(p)
+		if err != nil {
+			return 0, err
+		}
+		d.features[int(tag)] = val
+	case tColorMap:
+		val, err := d.ifdUint(p)
+		if err != nil {
+			return 0, err
+		}
+		numcolors := len(val) / 3
+		if len(val)%3 != 0 || numcolors <= 0 || numcolors > 256 {
+			return 0, FormatError("bad ColorMap length")
+		}
+		d.palette = make([]color.Color, numcolors)
+		for i := 0; i < numcolors; i++ {
+			d.palette[i] = color.RGBA64{
+				uint16(val[i]),
+				uint16(val[i+numcolors]),
+				uint16(val[i+2*numcolors]),
+				0xffff,
+			}
+		}
+	case tSampleFormat:
+		// Page 27 of the spec: If the SampleFormat is present and
+		// the value is not 1 [= unsigned integer data], a Baseline
+		// TIFF reader that cannot handle the SampleFormat value
+		// must terminate the import process gracefully.
+		val, err := d.ifdUint(p)
+		if err != nil {
+			return 0, err
+		}
+		for _, v := range val {
+			if v != 1 {
+				return 0, UnsupportedError("sample format")
+			}
+		}
+	}
+	return int(tag), nil
+}
+
+// readBits reads n bits from the internal buffer starting at the current offset.
+func (d *decoder) readBits(n uint) (v uint32, ok bool) {
+	for d.nbits < n {
+		d.v <<= 8
+		if d.off >= len(d.buf) {
+			return 0, false
+		}
+		d.v |= uint32(d.buf[d.off])
+		d.off++
+		d.nbits += 8
+	}
+	d.nbits -= n
+	rv := d.v >> d.nbits
+	d.v &^= rv << d.nbits
+	return rv, true
+}
+
+// flushBits discards the unread bits in the buffer used by readBits.
+// It is used at the end of a line.
+func (d *decoder) flushBits() {
+	d.v = 0
+	d.nbits = 0
+}
+
+// minInt returns the smaller of x or y.
+func minInt(a, b int) int {
+	if a <= b {
+		return a
+	}
+	return b
+}
+
+// decode decodes the raw data of an image.
+// It reads from d.buf and writes the strip or tile into dst.
+func (d *decoder) decode(dst image.Image, xmin, ymin, xmax, ymax int) error {
+	d.off = 0
+
+	// Apply horizontal predictor if necessary.
+	// In this case, p contains the color difference to the preceding pixel.
+	// See page 64-65 of the spec.
+	if d.firstVal(tPredictor) == prHorizontal {
+		switch d.bpp {
+		case 16:
+			var off int
+			n := 2 * len(d.features[tBitsPerSample]) // bytes per sample times samples per pixel
+			for y := ymin; y < ymax; y++ {
+				off += n
+				for x := 0; x < (xmax-xmin-1)*n; x += 2 {
+					if off+2 > len(d.buf) {
+						return errNoPixels
+					}
+					v0 := d.byteOrder.Uint16(d.buf[off-n : off-n+2])
+					v1 := d.byteOrder.Uint16(d.buf[off : off+2])
+					d.byteOrder.PutUint16(d.buf[off:off+2], v1+v0)
+					off += 2
+				}
+			}
+		case 8:
+			var off int
+			n := 1 * len(d.features[tBitsPerSample]) // bytes per sample times samples per pixel
+			for y := ymin; y < ymax; y++ {
+				off += n
+				for x := 0; x < (xmax-xmin-1)*n; x++ {
+					if off >= len(d.buf) {
+						return errNoPixels
+					}
+					d.buf[off] += d.buf[off-n]
+					off++
+				}
+			}
+		case 1:
+			return UnsupportedError("horizontal predictor with 1 BitsPerSample")
+		}
+	}
+
+	rMaxX := minInt(xmax, dst.Bounds().Max.X)
+	rMaxY := minInt(ymax, dst.Bounds().Max.Y)
+	switch d.mode {
+	case mGray, mGrayInvert:
+		if d.bpp == 16 {
+			img := dst.(*image.Gray16)
+			for y := ymin; y < rMaxY; y++ {
+				for x := xmin; x < rMaxX; x++ {
+					if d.off+2 > len(d.buf) {
+						return errNoPixels
+					}
+					v := d.byteOrder.Uint16(d.buf[d.off : d.off+2])
+					d.off += 2
+					if d.mode == mGrayInvert {
+						v = 0xffff - v
+					}
+					img.SetGray16(x, y, color.Gray16{v})
+				}
+				if rMaxX == img.Bounds().Max.X {
+					d.off += 2 * (xmax - img.Bounds().Max.X)
+				}
+			}
+		} else {
+			img := dst.(*image.Gray)
+			max := uint32((1 << d.bpp) - 1)
+			for y := ymin; y < rMaxY; y++ {
+				for x := xmin; x < rMaxX; x++ {
+					v, ok := d.readBits(d.bpp)
+					if !ok {
+						return errNoPixels
+					}
+					v = v * 0xff / max
+					if d.mode == mGrayInvert {
+						v = 0xff - v
+					}
+					img.SetGray(x, y, color.Gray{uint8(v)})
+				}
+				d.flushBits()
+			}
+		}
+	case mPaletted:
+		img := dst.(*image.Paletted)
+		for y := ymin; y < rMaxY; y++ {
+			for x := xmin; x < rMaxX; x++ {
+				v, ok := d.readBits(d.bpp)
+				if !ok {
+					return errNoPixels
+				}
+				img.SetColorIndex(x, y, uint8(v))
+			}
+			d.flushBits()
+		}
+	case mRGB:
+		if d.bpp == 16 {
+			img := dst.(*image.RGBA64)
+			for y := ymin; y < rMaxY; y++ {
+				for x := xmin; x < rMaxX; x++ {
+					if d.off+6 > len(d.buf) {
+						return errNoPixels
+					}
+					r := d.byteOrder.Uint16(d.buf[d.off+0 : d.off+2])
+					g := d.byteOrder.Uint16(d.buf[d.off+2 : d.off+4])
+					b := d.byteOrder.Uint16(d.buf[d.off+4 : d.off+6])
+					d.off += 6
+					img.SetRGBA64(x, y, color.RGBA64{r, g, b, 0xffff})
+				}
+			}
+		} else {
+			img := dst.(*image.RGBA)
+			for y := ymin; y < rMaxY; y++ {
+				min := img.PixOffset(xmin, y)
+				max := img.PixOffset(rMaxX, y)
+				off := (y - ymin) * (xmax - xmin) * 3
+				for i := min; i < max; i += 4 {
+					if off+3 > len(d.buf) {
+						return errNoPixels
+					}
+					img.Pix[i+0] = d.buf[off+0]
+					img.Pix[i+1] = d.buf[off+1]
+					img.Pix[i+2] = d.buf[off+2]
+					img.Pix[i+3] = 0xff
+					off += 3
+				}
+			}
+		}
+	case mNRGBA:
+		if d.bpp == 16 {
+			img := dst.(*image.NRGBA64)
+			for y := ymin; y < rMaxY; y++ {
+				for x := xmin; x < rMaxX; x++ {
+					if d.off+8 > len(d.buf) {
+						return errNoPixels
+					}
+					r := d.byteOrder.Uint16(d.buf[d.off+0 : d.off+2])
+					g := d.byteOrder.Uint16(d.buf[d.off+2 : d.off+4])
+					b := d.byteOrder.Uint16(d.buf[d.off+4 : d.off+6])
+					a := d.byteOrder.Uint16(d.buf[d.off+6 : d.off+8])
+					d.off += 8
+					img.SetNRGBA64(x, y, color.NRGBA64{r, g, b, a})
+				}
+			}
+		} else {
+			img := dst.(*image.NRGBA)
+			for y := ymin; y < rMaxY; y++ {
+				min := img.PixOffset(xmin, y)
+				max := img.PixOffset(rMaxX, y)
+				i0, i1 := (y-ymin)*(xmax-xmin)*4, (y-ymin+1)*(xmax-xmin)*4
+				if i1 > len(d.buf) {
+					return errNoPixels
+				}
+				copy(img.Pix[min:max], d.buf[i0:i1])
+			}
+		}
+	case mRGBA:
+		if d.bpp == 16 {
+			img := dst.(*image.RGBA64)
+			for y := ymin; y < rMaxY; y++ {
+				for x := xmin; x < rMaxX; x++ {
+					if d.off+8 > len(d.buf) {
+						return errNoPixels
+					}
+					r := d.byteOrder.Uint16(d.buf[d.off+0 : d.off+2])
+					g := d.byteOrder.Uint16(d.buf[d.off+2 : d.off+4])
+					b := d.byteOrder.Uint16(d.buf[d.off+4 : d.off+6])
+					a := d.byteOrder.Uint16(d.buf[d.off+6 : d.off+8])
+					d.off += 8
+					img.SetRGBA64(x, y, color.RGBA64{r, g, b, a})
+				}
+			}
+		} else {
+			img := dst.(*image.RGBA)
+			for y := ymin; y < rMaxY; y++ {
+				min := img.PixOffset(xmin, y)
+				max := img.PixOffset(rMaxX, y)
+				i0, i1 := (y-ymin)*(xmax-xmin)*4, (y-ymin+1)*(xmax-xmin)*4
+				if i1 > len(d.buf) {
+					return errNoPixels
+				}
+				copy(img.Pix[min:max], d.buf[i0:i1])
+			}
+		}
+	}
+
+	return nil
+}
+
+func newDecoder(r io.Reader) (*decoder, error) {
+	d := &decoder{
+		r:        newReaderAt(r),
+		features: make(map[int][]uint),
+	}
+
+	p := make([]byte, 8)
+	if _, err := d.r.ReadAt(p, 0); err != nil {
+		if err == io.EOF {
+			err = io.ErrUnexpectedEOF
+		}
+		return nil, err
+	}
+	switch string(p[0:4]) {
+	case leHeader:
+		d.byteOrder = binary.LittleEndian
+	case beHeader:
+		d.byteOrder = binary.BigEndian
+	default:
+		return nil, FormatError("malformed header")
+	}
+
+	ifdOffset := int64(d.byteOrder.Uint32(p[4:8]))
+
+	// The first two bytes contain the number of entries (12 bytes each).
+	if _, err := d.r.ReadAt(p[0:2], ifdOffset); err != nil {
+		return nil, err
+	}
+	numItems := int(d.byteOrder.Uint16(p[0:2]))
+
+	// All IFD entries are read in one chunk.
+	p = make([]byte, ifdLen*numItems)
+	if _, err := d.r.ReadAt(p, ifdOffset+2); err != nil {
+		return nil, err
+	}
+
+	prevTag := -1
+	for i := 0; i < len(p); i += ifdLen {
+		tag, err := d.parseIFD(p[i : i+ifdLen])
+		if err != nil {
+			return nil, err
+		}
+		if tag <= prevTag {
+			return nil, FormatError("tags are not sorted in ascending order")
+		}
+		prevTag = tag
+	}
+
+	d.config.Width = int(d.firstVal(tImageWidth))
+	d.config.Height = int(d.firstVal(tImageLength))
+
+	if _, ok := d.features[tBitsPerSample]; !ok {
+		// Default is 1 per specification.
+		d.features[tBitsPerSample] = []uint{1}
+	}
+	d.bpp = d.firstVal(tBitsPerSample)
+	switch d.bpp {
+	case 0:
+		return nil, FormatError("BitsPerSample must not be 0")
+	case 1, 8, 16:
+		// Nothing to do, these are accepted by this implementation.
+	default:
+		return nil, UnsupportedError(fmt.Sprintf("BitsPerSample of %v", d.bpp))
+	}
+
+	// Determine the image mode.
+	switch d.firstVal(tPhotometricInterpretation) {
+	case pRGB:
+		if d.bpp == 16 {
+			for _, b := range d.features[tBitsPerSample] {
+				if b != 16 {
+					return nil, FormatError("wrong number of samples for 16bit RGB")
+				}
+			}
+		} else {
+			for _, b := range d.features[tBitsPerSample] {
+				if b != 8 {
+					return nil, FormatError("wrong number of samples for 8bit RGB")
+				}
+			}
+		}
+		// RGB images normally have 3 samples per pixel.
+		// If there are more, ExtraSamples (p. 31-32 of the spec)
+		// gives their meaning (usually an alpha channel).
+		//
+		// This implementation does not support extra samples
+		// of an unspecified type.
+		switch len(d.features[tBitsPerSample]) {
+		case 3:
+			d.mode = mRGB
+			if d.bpp == 16 {
+				d.config.ColorModel = color.RGBA64Model
+			} else {
+				d.config.ColorModel = color.RGBAModel
+			}
+		case 4:
+			switch d.firstVal(tExtraSamples) {
+			case 1:
+				d.mode = mRGBA
+				if d.bpp == 16 {
+					d.config.ColorModel = color.RGBA64Model
+				} else {
+					d.config.ColorModel = color.RGBAModel
+				}
+			case 2:
+				d.mode = mNRGBA
+				if d.bpp == 16 {
+					d.config.ColorModel = color.NRGBA64Model
+				} else {
+					d.config.ColorModel = color.NRGBAModel
+				}
+			default:
+				return nil, FormatError("wrong number of samples for RGB")
+			}
+		default:
+			return nil, FormatError("wrong number of samples for RGB")
+		}
+	case pPaletted:
+		d.mode = mPaletted
+		d.config.ColorModel = color.Palette(d.palette)
+	case pWhiteIsZero:
+		d.mode = mGrayInvert
+		if d.bpp == 16 {
+			d.config.ColorModel = color.Gray16Model
+		} else {
+			d.config.ColorModel = color.GrayModel
+		}
+	case pBlackIsZero:
+		d.mode = mGray
+		if d.bpp == 16 {
+			d.config.ColorModel = color.Gray16Model
+		} else {
+			d.config.ColorModel = color.GrayModel
+		}
+	default:
+		return nil, UnsupportedError("color model")
+	}
+
+	return d, nil
+}
+
+// DecodeConfig returns the color model and dimensions of a TIFF image without
+// decoding the entire image.
+func DecodeConfig(r io.Reader) (image.Config, error) {
+	d, err := newDecoder(r)
+	if err != nil {
+		return image.Config{}, err
+	}
+	return d.config, nil
+}
+
+func ccittFillOrder(tiffFillOrder uint) ccitt.Order {
+	if tiffFillOrder == 2 {
+		return ccitt.LSB
+	}
+	return ccitt.MSB
+}
+
+// Decode reads a TIFF image from r and returns it as an image.Image.
+// The type of Image returned depends on the contents of the TIFF.
+func Decode(r io.Reader) (img image.Image, err error) {
+	d, err := newDecoder(r)
+	if err != nil {
+		return
+	}
+
+	blockPadding := false
+	blockWidth := d.config.Width
+	blockHeight := d.config.Height
+	blocksAcross := 1
+	blocksDown := 1
+
+	if d.config.Width == 0 {
+		blocksAcross = 0
+	}
+	if d.config.Height == 0 {
+		blocksDown = 0
+	}
+
+	var blockOffsets, blockCounts []uint
+
+	if int(d.firstVal(tTileWidth)) != 0 {
+		blockPadding = true
+
+		blockWidth = int(d.firstVal(tTileWidth))
+		blockHeight = int(d.firstVal(tTileLength))
+
+		if blockWidth != 0 {
+			blocksAcross = (d.config.Width + blockWidth - 1) / blockWidth
+		}
+		if blockHeight != 0 {
+			blocksDown = (d.config.Height + blockHeight - 1) / blockHeight
+		}
+
+		blockCounts = d.features[tTileByteCounts]
+		blockOffsets = d.features[tTileOffsets]
+
+	} else {
+		if int(d.firstVal(tRowsPerStrip)) != 0 {
+			blockHeight = int(d.firstVal(tRowsPerStrip))
+		}
+
+		if blockHeight != 0 {
+			blocksDown = (d.config.Height + blockHeight - 1) / blockHeight
+		}
+
+		blockOffsets = d.features[tStripOffsets]
+		blockCounts = d.features[tStripByteCounts]
+	}
+
+	// Check if we have the right number of strips/tiles, offsets and counts.
+	if n := blocksAcross * blocksDown; len(blockOffsets) < n || len(blockCounts) < n {
+		return nil, FormatError("inconsistent header")
+	}
+
+	imgRect := image.Rect(0, 0, d.config.Width, d.config.Height)
+	switch d.mode {
+	case mGray, mGrayInvert:
+		if d.bpp == 16 {
+			img = image.NewGray16(imgRect)
+		} else {
+			img = image.NewGray(imgRect)
+		}
+	case mPaletted:
+		img = image.NewPaletted(imgRect, d.palette)
+	case mNRGBA:
+		if d.bpp == 16 {
+			img = image.NewNRGBA64(imgRect)
+		} else {
+			img = image.NewNRGBA(imgRect)
+		}
+	case mRGB, mRGBA:
+		if d.bpp == 16 {
+			img = image.NewRGBA64(imgRect)
+		} else {
+			img = image.NewRGBA(imgRect)
+		}
+	}
+
+	for i := 0; i < blocksAcross; i++ {
+		blkW := blockWidth
+		if !blockPadding && i == blocksAcross-1 && d.config.Width%blockWidth != 0 {
+			blkW = d.config.Width % blockWidth
+		}
+		for j := 0; j < blocksDown; j++ {
+			blkH := blockHeight
+			if !blockPadding && j == blocksDown-1 && d.config.Height%blockHeight != 0 {
+				blkH = d.config.Height % blockHeight
+			}
+			offset := int64(blockOffsets[j*blocksAcross+i])
+			n := int64(blockCounts[j*blocksAcross+i])
+			switch d.firstVal(tCompression) {
+
+			// According to the spec, Compression does not have a default value,
+			// but some tools interpret a missing Compression value as none so we do
+			// the same.
+			case cNone, 0:
+				if b, ok := d.r.(*buffer); ok {
+					d.buf, err = b.Slice(int(offset), int(n))
+				} else {
+					d.buf = make([]byte, n)
+					_, err = d.r.ReadAt(d.buf, offset)
+				}
+			case cG3:
+				inv := d.firstVal(tPhotometricInterpretation) == pWhiteIsZero
+				order := ccittFillOrder(d.firstVal(tFillOrder))
+				r := ccitt.NewReader(io.NewSectionReader(d.r, offset, n), order, ccitt.Group3, blkW, blkH, &ccitt.Options{Invert: inv, Align: false})
+				d.buf, err = ioutil.ReadAll(r)
+			case cG4:
+				inv := d.firstVal(tPhotometricInterpretation) == pWhiteIsZero
+				order := ccittFillOrder(d.firstVal(tFillOrder))
+				r := ccitt.NewReader(io.NewSectionReader(d.r, offset, n), order, ccitt.Group4, blkW, blkH, &ccitt.Options{Invert: inv, Align: false})
+				d.buf, err = ioutil.ReadAll(r)
+			case cLZW:
+				r := lzw.NewReader(io.NewSectionReader(d.r, offset, n), lzw.MSB, 8)
+				d.buf, err = ioutil.ReadAll(r)
+				r.Close()
+			case cDeflate, cDeflateOld:
+				var r io.ReadCloser
+				r, err = zlib.NewReader(io.NewSectionReader(d.r, offset, n))
+				if err != nil {
+					return nil, err
+				}
+				d.buf, err = ioutil.ReadAll(r)
+				r.Close()
+			case cPackBits:
+				d.buf, err = unpackBits(io.NewSectionReader(d.r, offset, n))
+			default:
+				err = UnsupportedError(fmt.Sprintf("compression value %d", d.firstVal(tCompression)))
+			}
+			if err != nil {
+				return nil, err
+			}
+
+			xmin := i * blockWidth
+			ymin := j * blockHeight
+			xmax := xmin + blkW
+			ymax := ymin + blkH
+			err = d.decode(img, xmin, ymin, xmax, ymax)
+			if err != nil {
+				return nil, err
+			}
+		}
+	}
+	return
+}
+
+func init() {
+	image.RegisterFormat("tiff", leHeader, Decode, DecodeConfig)
+	image.RegisterFormat("tiff", beHeader, Decode, DecodeConfig)
+}
diff --git a/vendor/golang.org/x/image/tiff/writer.go b/vendor/golang.org/x/image/tiff/writer.go
new file mode 100644
index 00000000..c8a01cea
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/writer.go
@@ -0,0 +1,438 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package tiff
+
+import (
+	"bytes"
+	"compress/zlib"
+	"encoding/binary"
+	"image"
+	"io"
+	"sort"
+)
+
+// The TIFF format allows to choose the order of the different elements freely.
+// The basic structure of a TIFF file written by this package is:
+//
+//   1. Header (8 bytes).
+//   2. Image data.
+//   3. Image File Directory (IFD).
+//   4. "Pointer area" for larger entries in the IFD.
+
+// We only write little-endian TIFF files.
+var enc = binary.LittleEndian
+
+// An ifdEntry is a single entry in an Image File Directory.
+// A value of type dtRational is composed of two 32-bit values,
+// thus data contains two uints (numerator and denominator) for a single number.
+type ifdEntry struct {
+	tag      int
+	datatype int
+	data     []uint32
+}
+
+func (e ifdEntry) putData(p []byte) {
+	for _, d := range e.data {
+		switch e.datatype {
+		case dtByte, dtASCII:
+			p[0] = byte(d)
+			p = p[1:]
+		case dtShort:
+			enc.PutUint16(p, uint16(d))
+			p = p[2:]
+		case dtLong, dtRational:
+			enc.PutUint32(p, uint32(d))
+			p = p[4:]
+		}
+	}
+}
+
+type byTag []ifdEntry
+
+func (d byTag) Len() int           { return len(d) }
+func (d byTag) Less(i, j int) bool { return d[i].tag < d[j].tag }
+func (d byTag) Swap(i, j int)      { d[i], d[j] = d[j], d[i] }
+
+func encodeGray(w io.Writer, pix []uint8, dx, dy, stride int, predictor bool) error {
+	if !predictor {
+		return writePix(w, pix, dy, dx, stride)
+	}
+	buf := make([]byte, dx)
+	for y := 0; y < dy; y++ {
+		min := y*stride + 0
+		max := y*stride + dx
+		off := 0
+		var v0 uint8
+		for i := min; i < max; i++ {
+			v1 := pix[i]
+			buf[off] = v1 - v0
+			v0 = v1
+			off++
+		}
+		if _, err := w.Write(buf); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func encodeGray16(w io.Writer, pix []uint8, dx, dy, stride int, predictor bool) error {
+	buf := make([]byte, dx*2)
+	for y := 0; y < dy; y++ {
+		min := y*stride + 0
+		max := y*stride + dx*2
+		off := 0
+		var v0 uint16
+		for i := min; i < max; i += 2 {
+			// An image.Gray16's Pix is in big-endian order.
+			v1 := uint16(pix[i])<<8 | uint16(pix[i+1])
+			if predictor {
+				v0, v1 = v1, v1-v0
+			}
+			// We only write little-endian TIFF files.
+			buf[off+0] = byte(v1)
+			buf[off+1] = byte(v1 >> 8)
+			off += 2
+		}
+		if _, err := w.Write(buf); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func encodeRGBA(w io.Writer, pix []uint8, dx, dy, stride int, predictor bool) error {
+	if !predictor {
+		return writePix(w, pix, dy, dx*4, stride)
+	}
+	buf := make([]byte, dx*4)
+	for y := 0; y < dy; y++ {
+		min := y*stride + 0
+		max := y*stride + dx*4
+		off := 0
+		var r0, g0, b0, a0 uint8
+		for i := min; i < max; i += 4 {
+			r1, g1, b1, a1 := pix[i+0], pix[i+1], pix[i+2], pix[i+3]
+			buf[off+0] = r1 - r0
+			buf[off+1] = g1 - g0
+			buf[off+2] = b1 - b0
+			buf[off+3] = a1 - a0
+			off += 4
+			r0, g0, b0, a0 = r1, g1, b1, a1
+		}
+		if _, err := w.Write(buf); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func encodeRGBA64(w io.Writer, pix []uint8, dx, dy, stride int, predictor bool) error {
+	buf := make([]byte, dx*8)
+	for y := 0; y < dy; y++ {
+		min := y*stride + 0
+		max := y*stride + dx*8
+		off := 0
+		var r0, g0, b0, a0 uint16
+		for i := min; i < max; i += 8 {
+			// An image.RGBA64's Pix is in big-endian order.
+			r1 := uint16(pix[i+0])<<8 | uint16(pix[i+1])
+			g1 := uint16(pix[i+2])<<8 | uint16(pix[i+3])
+			b1 := uint16(pix[i+4])<<8 | uint16(pix[i+5])
+			a1 := uint16(pix[i+6])<<8 | uint16(pix[i+7])
+			if predictor {
+				r0, r1 = r1, r1-r0
+				g0, g1 = g1, g1-g0
+				b0, b1 = b1, b1-b0
+				a0, a1 = a1, a1-a0
+			}
+			// We only write little-endian TIFF files.
+			buf[off+0] = byte(r1)
+			buf[off+1] = byte(r1 >> 8)
+			buf[off+2] = byte(g1)
+			buf[off+3] = byte(g1 >> 8)
+			buf[off+4] = byte(b1)
+			buf[off+5] = byte(b1 >> 8)
+			buf[off+6] = byte(a1)
+			buf[off+7] = byte(a1 >> 8)
+			off += 8
+		}
+		if _, err := w.Write(buf); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func encode(w io.Writer, m image.Image, predictor bool) error {
+	bounds := m.Bounds()
+	buf := make([]byte, 4*bounds.Dx())
+	for y := bounds.Min.Y; y < bounds.Max.Y; y++ {
+		off := 0
+		if predictor {
+			var r0, g0, b0, a0 uint8
+			for x := bounds.Min.X; x < bounds.Max.X; x++ {
+				r, g, b, a := m.At(x, y).RGBA()
+				r1 := uint8(r >> 8)
+				g1 := uint8(g >> 8)
+				b1 := uint8(b >> 8)
+				a1 := uint8(a >> 8)
+				buf[off+0] = r1 - r0
+				buf[off+1] = g1 - g0
+				buf[off+2] = b1 - b0
+				buf[off+3] = a1 - a0
+				off += 4
+				r0, g0, b0, a0 = r1, g1, b1, a1
+			}
+		} else {
+			for x := bounds.Min.X; x < bounds.Max.X; x++ {
+				r, g, b, a := m.At(x, y).RGBA()
+				buf[off+0] = uint8(r >> 8)
+				buf[off+1] = uint8(g >> 8)
+				buf[off+2] = uint8(b >> 8)
+				buf[off+3] = uint8(a >> 8)
+				off += 4
+			}
+		}
+		if _, err := w.Write(buf); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// writePix writes the internal byte array of an image to w. It is less general
+// but much faster then encode. writePix is used when pix directly
+// corresponds to one of the TIFF image types.
+func writePix(w io.Writer, pix []byte, nrows, length, stride int) error {
+	if length == stride {
+		_, err := w.Write(pix[:nrows*length])
+		return err
+	}
+	for ; nrows > 0; nrows-- {
+		if _, err := w.Write(pix[:length]); err != nil {
+			return err
+		}
+		pix = pix[stride:]
+	}
+	return nil
+}
+
+func writeIFD(w io.Writer, ifdOffset int, d []ifdEntry) error {
+	var buf [ifdLen]byte
+	// Make space for "pointer area" containing IFD entry data
+	// longer than 4 bytes.
+	parea := make([]byte, 1024)
+	pstart := ifdOffset + ifdLen*len(d) + 6
+	var o int // Current offset in parea.
+
+	// The IFD has to be written with the tags in ascending order.
+	sort.Sort(byTag(d))
+
+	// Write the number of entries in this IFD.
+	if err := binary.Write(w, enc, uint16(len(d))); err != nil {
+		return err
+	}
+	for _, ent := range d {
+		enc.PutUint16(buf[0:2], uint16(ent.tag))
+		enc.PutUint16(buf[2:4], uint16(ent.datatype))
+		count := uint32(len(ent.data))
+		if ent.datatype == dtRational {
+			count /= 2
+		}
+		enc.PutUint32(buf[4:8], count)
+		datalen := int(count * lengths[ent.datatype])
+		if datalen <= 4 {
+			ent.putData(buf[8:12])
+		} else {
+			if (o + datalen) > len(parea) {
+				newlen := len(parea) + 1024
+				for (o + datalen) > newlen {
+					newlen += 1024
+				}
+				newarea := make([]byte, newlen)
+				copy(newarea, parea)
+				parea = newarea
+			}
+			ent.putData(parea[o : o+datalen])
+			enc.PutUint32(buf[8:12], uint32(pstart+o))
+			o += datalen
+		}
+		if _, err := w.Write(buf[:]); err != nil {
+			return err
+		}
+	}
+	// The IFD ends with the offset of the next IFD in the file,
+	// or zero if it is the last one (page 14).
+	if err := binary.Write(w, enc, uint32(0)); err != nil {
+		return err
+	}
+	_, err := w.Write(parea[:o])
+	return err
+}
+
+// Options are the encoding parameters.
+type Options struct {
+	// Compression is the type of compression used.
+	Compression CompressionType
+	// Predictor determines whether a differencing predictor is used;
+	// if true, instead of each pixel's color, the color difference to the
+	// preceding one is saved.  This improves the compression for certain
+	// types of images and compressors. For example, it works well for
+	// photos with Deflate compression.
+	Predictor bool
+}
+
+// Encode writes the image m to w. opt determines the options used for
+// encoding, such as the compression type. If opt is nil, an uncompressed
+// image is written.
+func Encode(w io.Writer, m image.Image, opt *Options) error {
+	d := m.Bounds().Size()
+
+	compression := uint32(cNone)
+	predictor := false
+	if opt != nil {
+		compression = opt.Compression.specValue()
+		// The predictor field is only used with LZW. See page 64 of the spec.
+		predictor = opt.Predictor && compression == cLZW
+	}
+
+	_, err := io.WriteString(w, leHeader)
+	if err != nil {
+		return err
+	}
+
+	// Compressed data is written into a buffer first, so that we
+	// know the compressed size.
+	var buf bytes.Buffer
+	// dst holds the destination for the pixel data of the image --
+	// either w or a writer to buf.
+	var dst io.Writer
+	// imageLen is the length of the pixel data in bytes.
+	// The offset of the IFD is imageLen + 8 header bytes.
+	var imageLen int
+
+	switch compression {
+	case cNone:
+		dst = w
+		// Write IFD offset before outputting pixel data.
+		switch m.(type) {
+		case *image.Paletted:
+			imageLen = d.X * d.Y * 1
+		case *image.Gray:
+			imageLen = d.X * d.Y * 1
+		case *image.Gray16:
+			imageLen = d.X * d.Y * 2
+		case *image.RGBA64:
+			imageLen = d.X * d.Y * 8
+		case *image.NRGBA64:
+			imageLen = d.X * d.Y * 8
+		default:
+			imageLen = d.X * d.Y * 4
+		}
+		err = binary.Write(w, enc, uint32(imageLen+8))
+		if err != nil {
+			return err
+		}
+	case cDeflate:
+		dst = zlib.NewWriter(&buf)
+	}
+
+	pr := uint32(prNone)
+	photometricInterpretation := uint32(pRGB)
+	samplesPerPixel := uint32(4)
+	bitsPerSample := []uint32{8, 8, 8, 8}
+	extraSamples := uint32(0)
+	colorMap := []uint32{}
+
+	if predictor {
+		pr = prHorizontal
+	}
+	switch m := m.(type) {
+	case *image.Paletted:
+		photometricInterpretation = pPaletted
+		samplesPerPixel = 1
+		bitsPerSample = []uint32{8}
+		colorMap = make([]uint32, 256*3)
+		for i := 0; i < 256 && i < len(m.Palette); i++ {
+			r, g, b, _ := m.Palette[i].RGBA()
+			colorMap[i+0*256] = uint32(r)
+			colorMap[i+1*256] = uint32(g)
+			colorMap[i+2*256] = uint32(b)
+		}
+		err = encodeGray(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	case *image.Gray:
+		photometricInterpretation = pBlackIsZero
+		samplesPerPixel = 1
+		bitsPerSample = []uint32{8}
+		err = encodeGray(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	case *image.Gray16:
+		photometricInterpretation = pBlackIsZero
+		samplesPerPixel = 1
+		bitsPerSample = []uint32{16}
+		err = encodeGray16(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	case *image.NRGBA:
+		extraSamples = 2 // Unassociated alpha.
+		err = encodeRGBA(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	case *image.NRGBA64:
+		extraSamples = 2 // Unassociated alpha.
+		bitsPerSample = []uint32{16, 16, 16, 16}
+		err = encodeRGBA64(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	case *image.RGBA:
+		extraSamples = 1 // Associated alpha.
+		err = encodeRGBA(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	case *image.RGBA64:
+		extraSamples = 1 // Associated alpha.
+		bitsPerSample = []uint32{16, 16, 16, 16}
+		err = encodeRGBA64(dst, m.Pix, d.X, d.Y, m.Stride, predictor)
+	default:
+		extraSamples = 1 // Associated alpha.
+		err = encode(dst, m, predictor)
+	}
+	if err != nil {
+		return err
+	}
+
+	if compression != cNone {
+		if err = dst.(io.Closer).Close(); err != nil {
+			return err
+		}
+		imageLen = buf.Len()
+		if err = binary.Write(w, enc, uint32(imageLen+8)); err != nil {
+			return err
+		}
+		if _, err = buf.WriteTo(w); err != nil {
+			return err
+		}
+	}
+
+	ifd := []ifdEntry{
+		{tImageWidth, dtShort, []uint32{uint32(d.X)}},
+		{tImageLength, dtShort, []uint32{uint32(d.Y)}},
+		{tBitsPerSample, dtShort, bitsPerSample},
+		{tCompression, dtShort, []uint32{compression}},
+		{tPhotometricInterpretation, dtShort, []uint32{photometricInterpretation}},
+		{tStripOffsets, dtLong, []uint32{8}},
+		{tSamplesPerPixel, dtShort, []uint32{samplesPerPixel}},
+		{tRowsPerStrip, dtShort, []uint32{uint32(d.Y)}},
+		{tStripByteCounts, dtLong, []uint32{uint32(imageLen)}},
+		// There is currently no support for storing the image
+		// resolution, so give a bogus value of 72x72 dpi.
+		{tXResolution, dtRational, []uint32{72, 1}},
+		{tYResolution, dtRational, []uint32{72, 1}},
+		{tResolutionUnit, dtShort, []uint32{resPerInch}},
+	}
+	if pr != prNone {
+		ifd = append(ifd, ifdEntry{tPredictor, dtShort, []uint32{pr}})
+	}
+	if len(colorMap) != 0 {
+		ifd = append(ifd, ifdEntry{tColorMap, dtShort, colorMap})
+	}
+	if extraSamples > 0 {
+		ifd = append(ifd, ifdEntry{tExtraSamples, dtShort, []uint32{extraSamples}})
+	}
+
+	return writeIFD(w, imageLen+8, ifd)
+}