1 files changed, 144 insertions, 0 deletions
diff --git a/vendor/github.com/klauspost/compress/fse/fse.go b/vendor/github.com/klauspost/compress/fse/fse.go
new file mode 100644
index 00000000..535cbadf
--- /dev/null
+++ b/vendor/github.com/klauspost/compress/fse/fse.go
@@ -0,0 +1,144 @@
+// Copyright 2018 Klaus Post. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+// Based on work Copyright (c) 2013, Yann Collet, released under BSD License.
+
+// Package fse provides Finite State Entropy encoding and decoding.
+//
+// Finite State Entropy encoding provides a fast near-optimal symbol encoding/decoding
+// for byte blocks as implemented in zstd.
+//
+// See https://github.com/klauspost/compress/tree/master/fse for more information.
+package fse
+
+import (
+	"errors"
+	"fmt"
+	"math/bits"
+)
+
+const (
+	/*!MEMORY_USAGE :
+	 *  Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; etc.)
+	 *  Increasing memory usage improves compression ratio
+	 *  Reduced memory usage can improve speed, due to cache effect
+	 *  Recommended max value is 14, for 16KB, which nicely fits into Intel x86 L1 cache */
+	maxMemoryUsage     = 14
+	defaultMemoryUsage = 13
+
+	maxTableLog     = maxMemoryUsage - 2
+	maxTablesize    = 1 << maxTableLog
+	defaultTablelog = defaultMemoryUsage - 2
+	minTablelog     = 5
+	maxSymbolValue  = 255
+)
+
+var (
+	// ErrIncompressible is returned when input is judged to be too hard to compress.
+	ErrIncompressible = errors.New("input is not compressible")
+
+	// ErrUseRLE is returned from the compressor when the input is a single byte value repeated.
+	ErrUseRLE = errors.New("input is single value repeated")
+)
+
+// Scratch provides temporary storage for compression and decompression.
+type Scratch struct {
+	// Private
+	count    [maxSymbolValue + 1]uint32
+	norm     [maxSymbolValue + 1]int16
+	br       byteReader
+	bits     bitReader
+	bw       bitWriter
+	ct       cTable      // Compression tables.
+	decTable []decSymbol // Decompression table.
+	maxCount int         // count of the most probable symbol
+
+	// Per block parameters.
+	// These can be used to override compression parameters of the block.
+	// Do not touch, unless you know what you are doing.
+
+	// Out is output buffer.
+	// If the scratch is re-used before the caller is done processing the output,
+	// set this field to nil.
+	// Otherwise the output buffer will be re-used for next Compression/Decompression step
+	// and allocation will be avoided.
+	Out []byte
+
+	// DecompressLimit limits the maximum decoded size acceptable.
+	// If > 0 decompression will stop when approximately this many bytes
+	// has been decoded.
+	// If 0, maximum size will be 2GB.
+	DecompressLimit int
+
+	symbolLen      uint16 // Length of active part of the symbol table.
+	actualTableLog uint8  // Selected tablelog.
+	zeroBits       bool   // no bits has prob > 50%.
+	clearCount     bool   // clear count
+
+	// MaxSymbolValue will override the maximum symbol value of the next block.
+	MaxSymbolValue uint8
+
+	// TableLog will attempt to override the tablelog for the next block.
+	TableLog uint8
+}
+
+// Histogram allows to populate the histogram and skip that step in the compression,
+// It otherwise allows to inspect the histogram when compression is done.
+// To indicate that you have populated the histogram call HistogramFinished
+// with the value of the highest populated symbol, as well as the number of entries
+// in the most populated entry. These are accepted at face value.
+// The returned slice will always be length 256.
+func (s *Scratch) Histogram() []uint32 {
+	return s.count[:]
+}
+
+// HistogramFinished can be called to indicate that the histogram has been populated.
+// maxSymbol is the index of the highest set symbol of the next data segment.
+// maxCount is the number of entries in the most populated entry.
+// These are accepted at face value.
+func (s *Scratch) HistogramFinished(maxSymbol uint8, maxCount int) {
+	s.maxCount = maxCount
+	s.symbolLen = uint16(maxSymbol) + 1
+	s.clearCount = maxCount != 0
+}
+
+// prepare will prepare and allocate scratch tables used for both compression and decompression.
+func (s *Scratch) prepare(in []byte) (*Scratch, error) {
+	if s == nil {
+		s = &Scratch{}
+	}
+	if s.MaxSymbolValue == 0 {
+		s.MaxSymbolValue = 255
+	}
+	if s.TableLog == 0 {
+		s.TableLog = defaultTablelog
+	}
+	if s.TableLog > maxTableLog {
+		return nil, fmt.Errorf("tableLog (%d) > maxTableLog (%d)", s.TableLog, maxTableLog)
+	}
+	if cap(s.Out) == 0 {
+		s.Out = make([]byte, 0, len(in))
+	}
+	if s.clearCount && s.maxCount == 0 {
+		for i := range s.count {
+			s.count[i] = 0
+		}
+		s.clearCount = false
+	}
+	s.br.init(in)
+	if s.DecompressLimit == 0 {
+		// Max size 2GB.
+		s.DecompressLimit = (2 << 30) - 1
+	}
+
+	return s, nil
+}
+
+// tableStep returns the next table index.
+func tableStep(tableSize uint32) uint32 {
+	return (tableSize >> 1) + (tableSize >> 3) + 3
+}
+
+func highBits(val uint32) (n uint32) {
+	return uint32(bits.Len32(val) - 1)
+}