Add sshchat dependencies in vendor

1 files changed, 633 insertions, 0 deletions

diff --git a/vendor/golang.org/x/crypto/ssh/channel.go b/vendor/golang.org/x/crypto/ssh/channel.go
new file mode 100644
index 00000000..c0834c00
--- /dev/null
+++ b/vendor/golang.org/x/crypto/ssh/channel.go
@@ -0,0 +1,633 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package ssh
+
+import (
+	"encoding/binary"
+	"errors"
+	"fmt"
+	"io"
+	"log"
+	"sync"
+)
+
+const (
+	minPacketLength = 9
+	// channelMaxPacket contains the maximum number of bytes that will be
+	// sent in a single packet. As per RFC 4253, section 6.1, 32k is also
+	// the minimum.
+	channelMaxPacket = 1 << 15
+	// We follow OpenSSH here.
+	channelWindowSize = 64 * channelMaxPacket
+)
+
+// NewChannel represents an incoming request to a channel. It must either be
+// accepted for use by calling Accept, or rejected by calling Reject.
+type NewChannel interface {
+	// Accept accepts the channel creation request. It returns the Channel
+	// and a Go channel containing SSH requests. The Go channel must be
+	// serviced otherwise the Channel will hang.
+	Accept() (Channel, <-chan *Request, error)
+
+	// Reject rejects the channel creation request. After calling
+	// this, no other methods on the Channel may be called.
+	Reject(reason RejectionReason, message string) error
+
+	// ChannelType returns the type of the channel, as supplied by the
+	// client.
+	ChannelType() string
+
+	// ExtraData returns the arbitrary payload for this channel, as supplied
+	// by the client. This data is specific to the channel type.
+	ExtraData() []byte
+}
+
+// A Channel is an ordered, reliable, flow-controlled, duplex stream
+// that is multiplexed over an SSH connection.
+type Channel interface {
+	// Read reads up to len(data) bytes from the channel.
+	Read(data []byte) (int, error)
+
+	// Write writes len(data) bytes to the channel.
+	Write(data []byte) (int, error)
+
+	// Close signals end of channel use. No data may be sent after this
+	// call.
+	Close() error
+
+	// CloseWrite signals the end of sending in-band
+	// data. Requests may still be sent, and the other side may
+	// still send data
+	CloseWrite() error
+
+	// SendRequest sends a channel request.  If wantReply is true,
+	// it will wait for a reply and return the result as a
+	// boolean, otherwise the return value will be false. Channel
+	// requests are out-of-band messages so they may be sent even
+	// if the data stream is closed or blocked by flow control.
+	// If the channel is closed before a reply is returned, io.EOF
+	// is returned.
+	SendRequest(name string, wantReply bool, payload []byte) (bool, error)
+
+	// Stderr returns an io.ReadWriter that writes to this channel
+	// with the extended data type set to stderr. Stderr may
+	// safely be read and written from a different goroutine than
+	// Read and Write respectively.
+	Stderr() io.ReadWriter
+}
+
+// Request is a request sent outside of the normal stream of
+// data. Requests can either be specific to an SSH channel, or they
+// can be global.
+type Request struct {
+	Type      string
+	WantReply bool
+	Payload   []byte
+
+	ch  *channel
+	mux *mux
+}
+
+// Reply sends a response to a request. It must be called for all requests
+// where WantReply is true and is a no-op otherwise. The payload argument is
+// ignored for replies to channel-specific requests.
+func (r *Request) Reply(ok bool, payload []byte) error {
+	if !r.WantReply {
+		return nil
+	}
+
+	if r.ch == nil {
+		return r.mux.ackRequest(ok, payload)
+	}
+
+	return r.ch.ackRequest(ok)
+}
+
+// RejectionReason is an enumeration used when rejecting channel creation
+// requests. See RFC 4254, section 5.1.
+type RejectionReason uint32
+
+const (
+	Prohibited RejectionReason = iota + 1
+	ConnectionFailed
+	UnknownChannelType
+	ResourceShortage
+)
+
+// String converts the rejection reason to human readable form.
+func (r RejectionReason) String() string {
+	switch r {
+	case Prohibited:
+		return "administratively prohibited"
+	case ConnectionFailed:
+		return "connect failed"
+	case UnknownChannelType:
+		return "unknown channel type"
+	case ResourceShortage:
+		return "resource shortage"
+	}
+	return fmt.Sprintf("unknown reason %d", int(r))
+}
+
+func min(a uint32, b int) uint32 {
+	if a < uint32(b) {
+		return a
+	}
+	return uint32(b)
+}
+
+type channelDirection uint8
+
+const (
+	channelInbound channelDirection = iota
+	channelOutbound
+)
+
+// channel is an implementation of the Channel interface that works
+// with the mux class.
+type channel struct {
+	// R/O after creation
+	chanType          string
+	extraData         []byte
+	localId, remoteId uint32
+
+	// maxIncomingPayload and maxRemotePayload are the maximum
+	// payload sizes of normal and extended data packets for
+	// receiving and sending, respectively. The wire packet will
+	// be 9 or 13 bytes larger (excluding encryption overhead).
+	maxIncomingPayload uint32
+	maxRemotePayload   uint32
+
+	mux *mux
+
+	// decided is set to true if an accept or reject message has been sent
+	// (for outbound channels) or received (for inbound channels).
+	decided bool
+
+	// direction contains either channelOutbound, for channels created
+	// locally, or channelInbound, for channels created by the peer.
+	direction channelDirection
+
+	// Pending internal channel messages.
+	msg chan interface{}
+
+	// Since requests have no ID, there can be only one request
+	// with WantReply=true outstanding.  This lock is held by a
+	// goroutine that has such an outgoing request pending.
+	sentRequestMu sync.Mutex
+
+	incomingRequests chan *Request
+
+	sentEOF bool
+
+	// thread-safe data
+	remoteWin  window
+	pending    *buffer
+	extPending *buffer
+
+	// windowMu protects myWindow, the flow-control window.
+	windowMu sync.Mutex
+	myWindow uint32
+
+	// writeMu serializes calls to mux.conn.writePacket() and
+	// protects sentClose and packetPool. This mutex must be
+	// different from windowMu, as writePacket can block if there
+	// is a key exchange pending.
+	writeMu   sync.Mutex
+	sentClose bool
+
+	// packetPool has a buffer for each extended channel ID to
+	// save allocations during writes.
+	packetPool map[uint32][]byte
+}
+
+// writePacket sends a packet. If the packet is a channel close, it updates
+// sentClose. This method takes the lock c.writeMu.
+func (ch *channel) writePacket(packet []byte) error {
+	ch.writeMu.Lock()
+	if ch.sentClose {
+		ch.writeMu.Unlock()
+		return io.EOF
+	}
+	ch.sentClose = (packet[0] == msgChannelClose)
+	err := ch.mux.conn.writePacket(packet)
+	ch.writeMu.Unlock()
+	return err
+}
+
+func (ch *channel) sendMessage(msg interface{}) error {
+	if debugMux {
+		log.Printf("send(%d): %#v", ch.mux.chanList.offset, msg)
+	}
+
+	p := Marshal(msg)
+	binary.BigEndian.PutUint32(p[1:], ch.remoteId)
+	return ch.writePacket(p)
+}
+
+// WriteExtended writes data to a specific extended stream. These streams are
+// used, for example, for stderr.
+func (ch *channel) WriteExtended(data []byte, extendedCode uint32) (n int, err error) {
+	if ch.sentEOF {
+		return 0, io.EOF
+	}
+	// 1 byte message type, 4 bytes remoteId, 4 bytes data length
+	opCode := byte(msgChannelData)
+	headerLength := uint32(9)
+	if extendedCode > 0 {
+		headerLength += 4
+		opCode = msgChannelExtendedData
+	}
+
+	ch.writeMu.Lock()
+	packet := ch.packetPool[extendedCode]
+	// We don't remove the buffer from packetPool, so
+	// WriteExtended calls from different goroutines will be
+	// flagged as errors by the race detector.
+	ch.writeMu.Unlock()
+
+	for len(data) > 0 {
+		space := min(ch.maxRemotePayload, len(data))
+		if space, err = ch.remoteWin.reserve(space); err != nil {
+			return n, err
+		}
+		if want := headerLength + space; uint32(cap(packet)) < want {
+			packet = make([]byte, want)
+		} else {
+			packet = packet[:want]
+		}
+
+		todo := data[:space]
+
+		packet[0] = opCode
+		binary.BigEndian.PutUint32(packet[1:], ch.remoteId)
+		if extendedCode > 0 {
+			binary.BigEndian.PutUint32(packet[5:], uint32(extendedCode))
+		}
+		binary.BigEndian.PutUint32(packet[headerLength-4:], uint32(len(todo)))
+		copy(packet[headerLength:], todo)
+		if err = ch.writePacket(packet); err != nil {
+			return n, err
+		}
+
+		n += len(todo)
+		data = data[len(todo):]
+	}
+
+	ch.writeMu.Lock()
+	ch.packetPool[extendedCode] = packet
+	ch.writeMu.Unlock()
+
+	return n, err
+}
+
+func (ch *channel) handleData(packet []byte) error {
+	headerLen := 9
+	isExtendedData := packet[0] == msgChannelExtendedData
+	if isExtendedData {
+		headerLen = 13
+	}
+	if len(packet) < headerLen {
+		// malformed data packet
+		return parseError(packet[0])
+	}
+
+	var extended uint32
+	if isExtendedData {
+		extended = binary.BigEndian.Uint32(packet[5:])
+	}
+
+	length := binary.BigEndian.Uint32(packet[headerLen-4 : headerLen])
+	if length == 0 {
+		return nil
+	}
+	if length > ch.maxIncomingPayload {
+		// TODO(hanwen): should send Disconnect?
+		return errors.New("ssh: incoming packet exceeds maximum payload size")
+	}
+
+	data := packet[headerLen:]
+	if length != uint32(len(data)) {
+		return errors.New("ssh: wrong packet length")
+	}
+
+	ch.windowMu.Lock()
+	if ch.myWindow < length {
+		ch.windowMu.Unlock()
+		// TODO(hanwen): should send Disconnect with reason?
+		return errors.New("ssh: remote side wrote too much")
+	}
+	ch.myWindow -= length
+	ch.windowMu.Unlock()
+
+	if extended == 1 {
+		ch.extPending.write(data)
+	} else if extended > 0 {
+		// discard other extended data.
+	} else {
+		ch.pending.write(data)
+	}
+	return nil
+}
+
+func (c *channel) adjustWindow(n uint32) error {
+	c.windowMu.Lock()
+	// Since myWindow is managed on our side, and can never exceed
+	// the initial window setting, we don't worry about overflow.
+	c.myWindow += uint32(n)
+	c.windowMu.Unlock()
+	return c.sendMessage(windowAdjustMsg{
+		AdditionalBytes: uint32(n),
+	})
+}
+
+func (c *channel) ReadExtended(data []byte, extended uint32) (n int, err error) {
+	switch extended {
+	case 1:
+		n, err = c.extPending.Read(data)
+	case 0:
+		n, err = c.pending.Read(data)
+	default:
+		return 0, fmt.Errorf("ssh: extended code %d unimplemented", extended)
+	}
+
+	if n > 0 {
+		err = c.adjustWindow(uint32(n))
+		// sendWindowAdjust can return io.EOF if the remote
+		// peer has closed the connection, however we want to
+		// defer forwarding io.EOF to the caller of Read until
+		// the buffer has been drained.
+		if n > 0 && err == io.EOF {
+			err = nil
+		}
+	}
+
+	return n, err
+}
+
+func (c *channel) close() {
+	c.pending.eof()
+	c.extPending.eof()
+	close(c.msg)
+	close(c.incomingRequests)
+	c.writeMu.Lock()
+	// This is not necessary for a normal channel teardown, but if
+	// there was another error, it is.
+	c.sentClose = true
+	c.writeMu.Unlock()
+	// Unblock writers.
+	c.remoteWin.close()
+}
+
+// responseMessageReceived is called when a success or failure message is
+// received on a channel to check that such a message is reasonable for the
+// given channel.
+func (ch *channel) responseMessageReceived() error {
+	if ch.direction == channelInbound {
+		return errors.New("ssh: channel response message received on inbound channel")
+	}
+	if ch.decided {
+		return errors.New("ssh: duplicate response received for channel")
+	}
+	ch.decided = true
+	return nil
+}
+
+func (ch *channel) handlePacket(packet []byte) error {
+	switch packet[0] {
+	case msgChannelData, msgChannelExtendedData:
+		return ch.handleData(packet)
+	case msgChannelClose:
+		ch.sendMessage(channelCloseMsg{PeersID: ch.remoteId})
+		ch.mux.chanList.remove(ch.localId)
+		ch.close()
+		return nil
+	case msgChannelEOF:
+		// RFC 4254 is mute on how EOF affects dataExt messages but
+		// it is logical to signal EOF at the same time.
+		ch.extPending.eof()
+		ch.pending.eof()
+		return nil
+	}
+
+	decoded, err := decode(packet)
+	if err != nil {
+		return err
+	}
+
+	switch msg := decoded.(type) {
+	case *channelOpenFailureMsg:
+		if err := ch.responseMessageReceived(); err != nil {
+			return err
+		}
+		ch.mux.chanList.remove(msg.PeersID)
+		ch.msg <- msg
+	case *channelOpenConfirmMsg:
+		if err := ch.responseMessageReceived(); err != nil {
+			return err
+		}
+		if msg.MaxPacketSize < minPacketLength || msg.MaxPacketSize > 1<<31 {
+			return fmt.Errorf("ssh: invalid MaxPacketSize %d from peer", msg.MaxPacketSize)
+		}
+		ch.remoteId = msg.MyID
+		ch.maxRemotePayload = msg.MaxPacketSize
+		ch.remoteWin.add(msg.MyWindow)
+		ch.msg <- msg
+	case *windowAdjustMsg:
+		if !ch.remoteWin.add(msg.AdditionalBytes) {
+			return fmt.Errorf("ssh: invalid window update for %d bytes", msg.AdditionalBytes)
+		}
+	case *channelRequestMsg:
+		req := Request{
+			Type:      msg.Request,
+			WantReply: msg.WantReply,
+			Payload:   msg.RequestSpecificData,
+			ch:        ch,
+		}
+
+		ch.incomingRequests <- &req
+	default:
+		ch.msg <- msg
+	}
+	return nil
+}
+
+func (m *mux) newChannel(chanType string, direction channelDirection, extraData []byte) *channel {
+	ch := &channel{
+		remoteWin:        window{Cond: newCond()},
+		myWindow:         channelWindowSize,
+		pending:          newBuffer(),
+		extPending:       newBuffer(),
+		direction:        direction,
+		incomingRequests: make(chan *Request, chanSize),
+		msg:              make(chan interface{}, chanSize),
+		chanType:         chanType,
+		extraData:        extraData,
+		mux:              m,
+		packetPool:       make(map[uint32][]byte),
+	}
+	ch.localId = m.chanList.add(ch)
+	return ch
+}
+
+var errUndecided = errors.New("ssh: must Accept or Reject channel")
+var errDecidedAlready = errors.New("ssh: can call Accept or Reject only once")
+
+type extChannel struct {
+	code uint32
+	ch   *channel
+}
+
+func (e *extChannel) Write(data []byte) (n int, err error) {
+	return e.ch.WriteExtended(data, e.code)
+}
+
+func (e *extChannel) Read(data []byte) (n int, err error) {
+	return e.ch.ReadExtended(data, e.code)
+}
+
+func (ch *channel) Accept() (Channel, <-chan *Request, error) {
+	if ch.decided {
+		return nil, nil, errDecidedAlready
+	}
+	ch.maxIncomingPayload = channelMaxPacket
+	confirm := channelOpenConfirmMsg{
+		PeersID:       ch.remoteId,
+		MyID:          ch.localId,
+		MyWindow:      ch.myWindow,
+		MaxPacketSize: ch.maxIncomingPayload,
+	}
+	ch.decided = true
+	if err := ch.sendMessage(confirm); err != nil {
+		return nil, nil, err
+	}
+
+	return ch, ch.incomingRequests, nil
+}
+
+func (ch *channel) Reject(reason RejectionReason, message string) error {
+	if ch.decided {
+		return errDecidedAlready
+	}
+	reject := channelOpenFailureMsg{
+		PeersID:  ch.remoteId,
+		Reason:   reason,
+		Message:  message,
+		Language: "en",
+	}
+	ch.decided = true
+	return ch.sendMessage(reject)
+}
+
+func (ch *channel) Read(data []byte) (int, error) {
+	if !ch.decided {
+		return 0, errUndecided
+	}
+	return ch.ReadExtended(data, 0)
+}
+
+func (ch *channel) Write(data []byte) (int, error) {
+	if !ch.decided {
+		return 0, errUndecided
+	}
+	return ch.WriteExtended(data, 0)
+}
+
+func (ch *channel) CloseWrite() error {
+	if !ch.decided {
+		return errUndecided
+	}
+	ch.sentEOF = true
+	return ch.sendMessage(channelEOFMsg{
+		PeersID: ch.remoteId})
+}
+
+func (ch *channel) Close() error {
+	if !ch.decided {
+		return errUndecided
+	}
+
+	return ch.sendMessage(channelCloseMsg{
+		PeersID: ch.remoteId})
+}
+
+// Extended returns an io.ReadWriter that sends and receives data on the given,
+// SSH extended stream. Such streams are used, for example, for stderr.
+func (ch *channel) Extended(code uint32) io.ReadWriter {
+	if !ch.decided {
+		return nil
+	}
+	return &extChannel{code, ch}
+}
+
+func (ch *channel) Stderr() io.ReadWriter {
+	return ch.Extended(1)
+}
+
+func (ch *channel) SendRequest(name string, wantReply bool, payload []byte) (bool, error) {
+	if !ch.decided {
+		return false, errUndecided
+	}
+
+	if wantReply {
+		ch.sentRequestMu.Lock()
+		defer ch.sentRequestMu.Unlock()
+	}
+
+	msg := channelRequestMsg{
+		PeersID:             ch.remoteId,
+		Request:             name,
+		WantReply:           wantReply,
+		RequestSpecificData: payload,
+	}
+
+	if err := ch.sendMessage(msg); err != nil {
+		return false, err
+	}
+
+	if wantReply {
+		m, ok := (<-ch.msg)
+		if !ok {
+			return false, io.EOF
+		}
+		switch m.(type) {
+		case *channelRequestFailureMsg:
+			return false, nil
+		case *channelRequestSuccessMsg:
+			return true, nil
+		default:
+			return false, fmt.Errorf("ssh: unexpected response to channel request: %#v", m)
+		}
+	}
+
+	return false, nil
+}
+
+// ackRequest either sends an ack or nack to the channel request.
+func (ch *channel) ackRequest(ok bool) error {
+	if !ch.decided {
+		return errUndecided
+	}
+
+	var msg interface{}
+	if !ok {
+		msg = channelRequestFailureMsg{
+			PeersID: ch.remoteId,
+		}
+	} else {
+		msg = channelRequestSuccessMsg{
+			PeersID: ch.remoteId,
+		}
+	}
+	return ch.sendMessage(msg)
+}
+
+func (ch *channel) ChannelType() string {
+	return ch.chanType
+}
+
+func (ch *channel) ExtraData() []byte {
+	return ch.extraData
+}