From 4f20ebead36876a88391bf033d1de3e4cf0228da Mon Sep 17 00:00:00 2001
From: Wim <wim@42.be>
Date: Thu, 31 Dec 2020 14:48:12 +0100
Subject: Update vendor for next release (#1343)

---
 vendor/golang.org/x/image/tiff/lzw/reader.go | 272 +++++++++++++++++++++++++++
 1 file changed, 272 insertions(+)
 create mode 100644 vendor/golang.org/x/image/tiff/lzw/reader.go

(limited to 'vendor/golang.org/x/image/tiff/lzw')

diff --git a/vendor/golang.org/x/image/tiff/lzw/reader.go b/vendor/golang.org/x/image/tiff/lzw/reader.go
new file mode 100644
index 00000000..78204ba9
--- /dev/null
+++ b/vendor/golang.org/x/image/tiff/lzw/reader.go
@@ -0,0 +1,272 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package lzw implements the Lempel-Ziv-Welch compressed data format,
+// described in T. A. Welch, ``A Technique for High-Performance Data
+// Compression'', Computer, 17(6) (June 1984), pp 8-19.
+//
+// In particular, it implements LZW as used by the TIFF file format, including
+// an "off by one" algorithmic difference when compared to standard LZW.
+package lzw // import "golang.org/x/image/tiff/lzw"
+
+/*
+This file was branched from src/pkg/compress/lzw/reader.go in the
+standard library. Differences from the original are marked with "NOTE".
+
+The tif_lzw.c file in the libtiff C library has this comment:
+
+----
+The 5.0 spec describes a different algorithm than Aldus
+implements.  Specifically, Aldus does code length transitions
+one code earlier than should be done (for real LZW).
+Earlier versions of this library implemented the correct
+LZW algorithm, but emitted codes in a bit order opposite
+to the TIFF spec.  Thus, to maintain compatibility w/ Aldus
+we interpret MSB-LSB ordered codes to be images written w/
+old versions of this library, but otherwise adhere to the
+Aldus "off by one" algorithm.
+----
+
+The Go code doesn't read (invalid) TIFF files written by old versions of
+libtiff, but the LZW algorithm in this package still differs from the one in
+Go's standard package library to accomodate this "off by one" in valid TIFFs.
+*/
+
+import (
+	"bufio"
+	"errors"
+	"fmt"
+	"io"
+)
+
+// Order specifies the bit ordering in an LZW data stream.
+type Order int
+
+const (
+	// LSB means Least Significant Bits first, as used in the GIF file format.
+	LSB Order = iota
+	// MSB means Most Significant Bits first, as used in the TIFF and PDF
+	// file formats.
+	MSB
+)
+
+const (
+	maxWidth           = 12
+	decoderInvalidCode = 0xffff
+	flushBuffer        = 1 << maxWidth
+)
+
+// decoder is the state from which the readXxx method converts a byte
+// stream into a code stream.
+type decoder struct {
+	r        io.ByteReader
+	bits     uint32
+	nBits    uint
+	width    uint
+	read     func(*decoder) (uint16, error) // readLSB or readMSB
+	litWidth int                            // width in bits of literal codes
+	err      error
+
+	// The first 1<<litWidth codes are literal codes.
+	// The next two codes mean clear and EOF.
+	// Other valid codes are in the range [lo, hi] where lo := clear + 2,
+	// with the upper bound incrementing on each code seen.
+	// overflow is the code at which hi overflows the code width. NOTE: TIFF's LZW is "off by one".
+	// last is the most recently seen code, or decoderInvalidCode.
+	clear, eof, hi, overflow, last uint16
+
+	// Each code c in [lo, hi] expands to two or more bytes. For c != hi:
+	//   suffix[c] is the last of these bytes.
+	//   prefix[c] is the code for all but the last byte.
+	//   This code can either be a literal code or another code in [lo, c).
+	// The c == hi case is a special case.
+	suffix [1 << maxWidth]uint8
+	prefix [1 << maxWidth]uint16
+
+	// output is the temporary output buffer.
+	// Literal codes are accumulated from the start of the buffer.
+	// Non-literal codes decode to a sequence of suffixes that are first
+	// written right-to-left from the end of the buffer before being copied
+	// to the start of the buffer.
+	// It is flushed when it contains >= 1<<maxWidth bytes,
+	// so that there is always room to decode an entire code.
+	output [2 * 1 << maxWidth]byte
+	o      int    // write index into output
+	toRead []byte // bytes to return from Read
+}
+
+// readLSB returns the next code for "Least Significant Bits first" data.
+func (d *decoder) readLSB() (uint16, error) {
+	for d.nBits < d.width {
+		x, err := d.r.ReadByte()
+		if err != nil {
+			return 0, err
+		}
+		d.bits |= uint32(x) << d.nBits
+		d.nBits += 8
+	}
+	code := uint16(d.bits & (1<<d.width - 1))
+	d.bits >>= d.width
+	d.nBits -= d.width
+	return code, nil
+}
+
+// readMSB returns the next code for "Most Significant Bits first" data.
+func (d *decoder) readMSB() (uint16, error) {
+	for d.nBits < d.width {
+		x, err := d.r.ReadByte()
+		if err != nil {
+			return 0, err
+		}
+		d.bits |= uint32(x) << (24 - d.nBits)
+		d.nBits += 8
+	}
+	code := uint16(d.bits >> (32 - d.width))
+	d.bits <<= d.width
+	d.nBits -= d.width
+	return code, nil
+}
+
+func (d *decoder) Read(b []byte) (int, error) {
+	for {
+		if len(d.toRead) > 0 {
+			n := copy(b, d.toRead)
+			d.toRead = d.toRead[n:]
+			return n, nil
+		}
+		if d.err != nil {
+			return 0, d.err
+		}
+		d.decode()
+	}
+}
+
+// decode decompresses bytes from r and leaves them in d.toRead.
+// read specifies how to decode bytes into codes.
+// litWidth is the width in bits of literal codes.
+func (d *decoder) decode() {
+	// Loop over the code stream, converting codes into decompressed bytes.
+loop:
+	for {
+		code, err := d.read(d)
+		if err != nil {
+			if err == io.EOF {
+				err = io.ErrUnexpectedEOF
+			}
+			d.err = err
+			break
+		}
+		switch {
+		case code < d.clear:
+			// We have a literal code.
+			d.output[d.o] = uint8(code)
+			d.o++
+			if d.last != decoderInvalidCode {
+				// Save what the hi code expands to.
+				d.suffix[d.hi] = uint8(code)
+				d.prefix[d.hi] = d.last
+			}
+		case code == d.clear:
+			d.width = 1 + uint(d.litWidth)
+			d.hi = d.eof
+			d.overflow = 1 << d.width
+			d.last = decoderInvalidCode
+			continue
+		case code == d.eof:
+			d.err = io.EOF
+			break loop
+		case code <= d.hi:
+			c, i := code, len(d.output)-1
+			if code == d.hi && d.last != decoderInvalidCode {
+				// code == hi is a special case which expands to the last expansion
+				// followed by the head of the last expansion. To find the head, we walk
+				// the prefix chain until we find a literal code.
+				c = d.last
+				for c >= d.clear {
+					c = d.prefix[c]
+				}
+				d.output[i] = uint8(c)
+				i--
+				c = d.last
+			}
+			// Copy the suffix chain into output and then write that to w.
+			for c >= d.clear {
+				d.output[i] = d.suffix[c]
+				i--
+				c = d.prefix[c]
+			}
+			d.output[i] = uint8(c)
+			d.o += copy(d.output[d.o:], d.output[i:])
+			if d.last != decoderInvalidCode {
+				// Save what the hi code expands to.
+				d.suffix[d.hi] = uint8(c)
+				d.prefix[d.hi] = d.last
+			}
+		default:
+			d.err = errors.New("lzw: invalid code")
+			break loop
+		}
+		d.last, d.hi = code, d.hi+1
+		if d.hi+1 >= d.overflow { // NOTE: the "+1" is where TIFF's LZW differs from the standard algorithm.
+			if d.width == maxWidth {
+				d.last = decoderInvalidCode
+			} else {
+				d.width++
+				d.overflow <<= 1
+			}
+		}
+		if d.o >= flushBuffer {
+			break
+		}
+	}
+	// Flush pending output.
+	d.toRead = d.output[:d.o]
+	d.o = 0
+}
+
+var errClosed = errors.New("lzw: reader/writer is closed")
+
+func (d *decoder) Close() error {
+	d.err = errClosed // in case any Reads come along
+	return nil
+}
+
+// NewReader creates a new io.ReadCloser.
+// Reads from the returned io.ReadCloser read and decompress data from r.
+// If r does not also implement io.ByteReader,
+// the decompressor may read more data than necessary from r.
+// It is the caller's responsibility to call Close on the ReadCloser when
+// finished reading.
+// The number of bits to use for literal codes, litWidth, must be in the
+// range [2,8] and is typically 8. It must equal the litWidth
+// used during compression.
+func NewReader(r io.Reader, order Order, litWidth int) io.ReadCloser {
+	d := new(decoder)
+	switch order {
+	case LSB:
+		d.read = (*decoder).readLSB
+	case MSB:
+		d.read = (*decoder).readMSB
+	default:
+		d.err = errors.New("lzw: unknown order")
+		return d
+	}
+	if litWidth < 2 || 8 < litWidth {
+		d.err = fmt.Errorf("lzw: litWidth %d out of range", litWidth)
+		return d
+	}
+	if br, ok := r.(io.ByteReader); ok {
+		d.r = br
+	} else {
+		d.r = bufio.NewReader(r)
+	}
+	d.litWidth = litWidth
+	d.width = 1 + uint(litWidth)
+	d.clear = uint16(1) << uint(litWidth)
+	d.eof, d.hi = d.clear+1, d.clear+1
+	d.overflow = uint16(1) << d.width
+	d.last = decoderInvalidCode
+
+	return d
+}
-- 
cgit v1.2.3